Hodgman H-Lock Interchangeable Sole Wade Boots
Wade with confidence using the most advanced wading boot system available. Visit http://www.hodgman.com/hlock for more info. The Hodgman H-Lock interchangeable sole system allows you to swap soles for idea traction in any terrain or aquatic environment.
Hodgman H-Lock Wade Boots - How to Use the Interchangeable Sole
Step by step instructions.
Hodgman H3 Wade Shoe Product Video
Whether you are crawling up rocky river terrain or navigating slick wading conditions, the H3 wade shoe is designed to get the job done. The lightweight design utilizes a shock absorbing EVA mid-sole so you can wade all day and put on the miles without getting worn down. (SHOW MORE) Mesh drainage ports on the side panel and quick drying hydrophobic materials shed water and unwanted added weight while wading. The padded collar and tongue along with the hiking boot ergonomic design ensure comfort and ankle support. The H3 is available in felt sole and sticky rubber sole models (refer to local regulations on the use of felt soles)
Top
Hodgman Aesis Sonic Stocking Foot Wader Product Video
  • Durable puncture resistant 5-Layer seat and legs with no inside leg seam eliminating leak points from abrasion points
  • Breathable 4-Layer upper for moisture vapor transfer •Sonic 2.0 seams
  • Top loading external pocket with water resistant zipper
  • Suspender system converts waders from chest to waist high without removing suspenders
  • Anatomically correct left and right neoprene booties
  • Flip out internal zippered storage pocket
  • Stretch wade belt with low profile DuraFlex® buckle and belt loops •D-Ring on back for net
  • Core INS removable insulation system compatible
Hodgman H5 Stocking Foot Wader Product Video
  • Durable puncture resistant 5-Layer seat and legs with no inside leg seam eliminating leak points from abrasion points
  • Breathable 3-Layer upper for moisture vapor transfer 
  • Stitched and taped waterproof seams
  • Top loading external pocket with water resistant zipper
  • Micro-fleece lined hand warmer with water resistant zippers
  • Y-Back elastic suspenders with low profile DuraFlex® buckles
  • Anatomically correct left and right neoprene booties
  • Flip out internal zippered storage pocket
  • Comfort Fit gravel guard design eliminates pressure points above ankle
  • Wade belt with low profile DuraFlex® buckle and belt loops
  • D-Ring on back for net
  • Core INS removable insulation system compatible
Hodgman H4 Stocking Foot Wader Product Video
It’s hard to imagine that you can get so much without shelling out two hundred bucks, but you can’t beat the performance packed in this wader for the price. One day on the water and you’ll agree the Hodgman H4 Stocking Foot Wader is the perfect fit for recreational anglers who spend many days on the water each year.
Hodgman H3 Stocking Foot Wader Product Video​
The Hodgman® H3 stocking foot wader is perfect for light use anglers that are looking to keep things simple without breaking the bank. Constructed from a 3 layer breathable waterproof shell, the H3 features a mesh tippet chest zippered pocket and exit for larger leaders. Finding a wader with a fleece lined hand warmer is hard to come by at this price but rest assured we didn't skimp on features. (SHOW MORE) You'll even find a wading belt with the center back loop to keep it from getting lost if you unbuckle it. This wader also accepts the Core INS removable zoned insulation system so you can transform your wader for cold or warm weather wading (sold separately). The liner zips in to create the one and only all-season wader available. The 3.5mm booties are designed with anatomically correct left and right feet for a custom fit, and our Comfort Fit Gravel Guard design eliminates a bulky and uncomfortable connection point on your shin.​
Hodgman Aesis™ Shell Jacket Product Video
NOW AVAILABLE. We designed the Aesis Shell Jacket with a double water-shedding rain fly on the front zipper and fully taped seams, so even in the worst torrential downpour, Mother Nature can throw your way you’ll be sure to stay dry.
Hodgman Aesis 3-In-1 Systems Jacket Product Video
  • OUTER JACKET • 2-Layer waterproof/windproof V-TecH™ breathable fabric with warm micro-fleece lining and fully taped seams
  • 3-way adjustable, removable and ​stowable wire brimmed hood
  • Triple water shedding rain fly
  • Two large front pockets and magnetic patch for quick fly storage
  • ROM™ articulated fit and design for optimum range of motion
  • Hidden nylon D-rings on front chest for accessory attachment
  • High water hand warmer pockets located on chest
  • Two YKK® vertical water repellent zip chest pockets
  • Storm watertight cinch cuffs
  • Belt catch loop keeps jacket in place while putting on wader
  • Inner security pocket INNER JACKET
  • Removable inner insulated systems jacket
  • Thinsulate® moisture resistant insulation retains insulating value even when damp
  • Two lower YKK® zip hand pockets
  • Vertical zippered chest pocket for storage
  • High water hand warmer pockets located on chest
  • Belt catch loop keeps jacket in place while putting on wader
  • Inner security pocket
Hodgman Core INS Removable Insulated Liner - How To Install Video
Convert your Hodgman® wader using the one and only all-season wader insulating system. The removable Core INS system utilizes zoned insulation in your lower body where you need it most. We utilize Thinsulate® insulation in the leg and hip which are submerged most often so the frigid bite from cold water doesn't reach your legs. Additionally, if you work up a sweat getting to your fishing spot the moisture resistant breathable insulation keeps you warm even when moist. A fleece upper ensures comfort where you need less insulation above the water.
  • To install the Core INS system in a few minutes follow these easy steps. You can also watch the instructional video on our YouTube Channel HodgmanTV
  • Lay the wader and the liner face up next to each other on the ground.
  • Unbuckle the shoulder straps to allow access to the inside of the wader. (On the drop top designs included on the Aesis Sonic waders remove the Velcro attachment point located on the rear buckle instead of unbuckling the front of the wader).
  • Reach inside the wader and pull the right leg of the wader inside out to expose the connection snap points located at the inside top of the stocking foot bootie.
  • Connect the liner to the wader by snapping the corresponding green snaps to green connection points on the wader and the red to red connection points. Then snap the front and back connection points in place. (Be sure the leg on the Core INS liner is not twisted)
  • Reach inside the wader and pull the left leg inside out and connect the corresponding red, green and black connection points as you did in step 3.
  • Grab the stocking foot of each wader leg and pull to turn the wader right side out. The liner will be pulled inside your wader as the wader is turned right side out.
  • Secure the upper portion of the removable liner to the wader using the two zippers located on the upper inside of the wader. The zippers are under the flap of fabric just inside the top of the wader.
Remember to point your toe when putting on the wader with the liner installed.  This will prevent the liner fabric from being pushed down over the leg opening and driving the liner into the stocking foot bootie.  It also is a good idea to grasp the leg of the wader to hold the liner as you put it on.
  
Hodgman Core INS Removable Insulated Liner - How To Install Video
This area is fully editable and gives you the opportunity to go into more detail about your business, what you do and what sets you apart from the competition. This area is fully editable and gives you the opportunity to go into more detail about your business, what you do and what sets you apart from the competition his area is fully editable and gives you the opportunity to go into more detail about your business, what you do and what sets you apart from the competition.